Special, without a new light fixture
You keep your pendant light and only change the shade. After that, it's the focal point of the room.
In the evening you switch on the light, and above your dining table the whole shade glows warmly. Our modern pendant light shades come in globe, teardrop and wave shapes, about 8.3 to 13.8 in. across, and in white, beige, terracotta and more colors, for your ceiling pendant over the dining table.
You keep your ceiling pendant and only change the shade: it fits a standard US E26 pendant socket (sold separately) and screws down. Use only a warm-white E26 LED up to 15W.
Hand-crafted in our small Claremont studio · 60-day returns · Made to order in California — ships in ~1-2 weeks, tracked
First the shape, then color and size.
You keep your pendant light and only change the shade. After that, it's the focal point of the room.
Every shade is built layer by layer from PLA in our small Claremont studio in America. Up close you'll see fine lines that form the ribs and waves.
| Diameter | Recommended for |
|---|---|
| Ø 9.8 in (25 cm) | Hallway, reading nook, nightstand |
| Ø 11.8 in (30 cm) | Dining table for 2–4, bedroom |
| Ø 13.8 in (35 cm) | Large dining table, high ceilings |
In large rooms and under high ceilings, a shade looks smaller than you'd expect. When in doubt, go one size up. Dimensions for each model are on the product page.
When lit, every shade looks warmer than during the day, especially Beige and Gray. Screens show colors differently. Our Beige is a light, warm natural tone.
Yes. Hang two or three shades in a row, in different sizes or colors, like Onda in Terracotta, White, and Beige. Each shade needs its own socket.
Low enough that the light doesn't glare when you're sitting, and high enough that no one bumps into it. Hang the shade temporarily and sit under it before you set the cord length.
Not for the shade: you set it on the E26 socket and screw it down. If a new pendant needs to be wired to the ceiling, have a licensed electrician connect it.
In bed at night, the light should be soft. Pera and Drupa with their teardrop shape work well, also as a pair on the left and right above the bed. Use a warm-white LED at 2700 K.
Bubble has playful bubbles; Ripple and Wave have waves. Bubble also comes in Pink and Purple, Wave in Orange. Use only LEDs up to 15 W, because PLA can deform at around 122 °F (50 °C).
Yes — for a housewarming, a birthday, or Christmas. Imagine their face when the light goes on for the first time. Quietly check first that there's an E26 socket on the ceiling.
You might also like:
Mushroom and table lamps

An order over .